Motorola APX 4500 O2 CH - Using the Time-Out Timer

APX 4500 O2 CH
47
NEXT > < PREV CONTENTS
 Using the Time-Out Timer
UTILITIES
This feature turns off your radio’s transmitter. You cannot
transmit longer than the preset timer setting.
If you attempt to do so, the radio automatically stops your
transmission, and you hear a talk-prohibit tone.
The timer is defaulted at 60 seconds, but it can be
preprogrammed from 3 to 120 seconds, in 15-second
intervals, or it can be disabled entirely for each radio mode,
by a qualified radio technician.
Note: You will hear a brief, low-pitched, warning tone four
seconds before the transmission times out.
ALL RADIOS ARE PROGRAMMED WITH A 60 SECOND
TIME OUT TIMER
Procedure:
1 Hold down the PTT button longer than the preprogrammed
time.
You hear a short, low-pitched warning tone, the
transmission is cut-off, and the LED goes out until you
release the PTT button.
2 Release the PTT button.
The LEDs relight and the timer resets.
3 Press the PTT button to re-transmit.
The time-out timer restarts and the LED lights up solid red.