Advanced Features
English
74
8 Press the Menu Select button directly below EXIT to exit
the feature and return to the main screen.
OR
Press
H or the PTT button (if preprogrammed) to exit this
menu.
OR
Follow the procedure below to turn off the GPS:
1 < or > to LOC.
2 Press the Menu Select button directly below LOC. The
display shows PREVIOUS LOC <LATITUDE>.
3 < or > to check the longitude, time and date of the last
successful location fix.
4 Press the Menu Select button directly below OPTN to turn
off the GPS.
5 Press the Menu Select button directly below EXIT to exit
the feature and return to the main screen.
OR
Press
H or the PTT button (if preprogrammed) to exit this
menu.
The radio also exits the menu if the emergency button is
pressed.
Saving a Waypoint
Procedure:
While in the current location display:
1 Press the Menu Select button directly below OPTN.
2 < or > to SAVE AS WAYPNT and press the Menu Select
button directly below SEL.
3 A blinking cursor appears in the Save as waypoint screen.
Use the keypad to type the alias via multi-tap.
Press < to move one space to the left.
Press
> to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
4 Press the Menu Select button directly below OK once you
are done.
5 You CURRENT LOC SAVED AS <WAYPOINT NAME> on the
display.
6 Press the Menu Select button directly below EXIT to exit
the feature and return to the main screen.
OR
Press H or the PTT button (if preprogrammed) to exit this
menu.
To Next Page
Loading...
