Motorola APX 7500 O5 - Editing the Alias of a Waypoint; Viewing a Saved Waypoint

Advanced Features
English
75
Viewing a Saved Waypoint
Procedure:
While in the current location display:
1 Press the Menu Select button directly below OPTN.
2 < or > to WAYPOINTS.
3 Press the Menu Select button directly below SEL. The
display shows Waypoints name.
4 < or > to desired waypoints name.
5 Press the Menu Select button directly below OPTN.
6 > to VIEW.
7 Press the Menu Select button directly below SEL.
8 > again to view UTC and date the waypoint was detected.
9 Press the Menu Select button directly below BACK to return
to previous Waypoint screen.
OR
Press the Menu Select button directly below OK to return to
Location screen.
OR
Press H to return to Home screen.
OR
Press PTT button to return to Home screen.
Editing the Alias of a Waypoint
Procedure:
While in the current location display:
1 Press the Menu Select button directly below OPTN. The
display shows Options screen.
2 < or > to WAYPOINTS.
3 Press the Menu Select button directly below SEL. The
display shows Waypoints screen.
4 > or < to desired waypoints.
5 Press the Menu Select button directly below OPTN.
6 > or < to EDIT NAME.
7 Press the Menu Select button directly below SEL. The
display shows Edit Name screen.
8 A blinking cursor appears in the Save as waypnt screen.
Use the keypad to type the alias via multi-tap.
Press
< to move one space to the left.
Press
> to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
