Troubleshooting Hints
FLASHport User’s Guide
16
Host Code Not Present! This is an error with the software upgrade kit. It
is either corrupted or does not contain the
required HOST software. Verify that the correct
software upgrade kit has been selected.
Error extracting DSP soft-
ware from upgrade file
This is an error with the software upgrade kit. It
is either corrupted or error occurred while
extracting the DSP software. Verify that the cor-
rect software upgrade kit has been selected.
Checksum Error in the Flash
Upgrade File.
This is an error with the software upgrade kit. It
is corrupted and does not contain a valid check-
sum.
Dsp Code Not Present! This is an error with the software upgrade kit. It
is either corrupted or does not contain the
required DSP code. Verify that correct software
upgrade kit has been selected.
Error Opening Flash
Upgrade File
This is an error with the software upgrade kit. It
is either corrupted or the application cannot
locate it. Verify that the correct software upgrade
kit has been selected and that the user has per-
missions to read the file.
There is a FLASH file and
hardware mismatch
This is an error with the software upgrade kit.
The file does not have the correct radio type for
the radio being upgraded. Verify that the correct
software upgrade kit has been selected.
Invalid Upgrade File Format This is an error with the software upgrade kit. It
is either corrupted or the contents of it are incor-
rect. Verify that the correct software upgrade kit
has been selected.
Error encountered while
handling the Flash Upgrade
File.
This error means that the application had prob-
lems extracting data from the software upgrade
kit. Verify that the correct software upgrade kit
has been selected.
94C35_Book.book Page 16 Thursday, June 2, 2005 3:10 PM
To Next Page
Loading...
Need help?
General