Troubleshooting Hints
FLASHport User’s Guide
18
This radio can only be
refreshed. The FLASHkey
must be a refresh key.
This is an error with the FLASHkey. Some
radios can only be refreshed therefore only a
Refresh FLASHkey can be used. Verify that the
correct FLASHkey is attached from the CPS
Menubar (Tools->FLASHport->Read FLASH-
key Configuration). From this Read FLASHkey
screen, confirm that in the model number field,
the value "REFRESH FLASHKEY" appears.
FLASHkey ID Verify Error -
Upgrade Aborted
This is an error with the FLASHkey. The applica-
tion was unable to validate the FLASHkey. Verify
that the FLASHkey is connected properly from
the CPS Menubar (Tools->FLASHport->Read
FLASHkey Configuration). If unable to read, the
FLASHkey must have been corrupted and a
new FLASHkey is needed.
FLASHkey Data Read Error This is an error with the FLASHkey. The applica-
tion was unable to read the FLASHkey data.
Verify that the FLASHkey is connected properly
from the CPS Menubar (Tools->FLASHport-
>Read FLASHkey Configuration). If unable to
read, the FLASHkey must have been corrupted
and a new FLASHkey is needed.
The FLASH Upgrade Failed!!
Cannot read the FLASH-
key.\nVerify that the FLASH-
key is properly connected.
This is an error with the FLASHkey. The CPS
was unable to read the FLASHkey. Verify that
the FLASHkey is connected properly from the
CPS Menubar (Tools->FLASHport->Read
FLASHkey Configuration). If unable to read, the
FLASHkey must have been corrupted and a
new FLASHkey is needed.
Invalid FLASHkey This is an error with the FLASHkey. The refresh
FLASHkey connected is invalid. Verify that the
FLASHkey is connected properly from the CPS
Menubar (Tools->FLASHport->Read FLASH-
key Configuration). If unable to read, the
FLASHkey must have been corrupted and a
new FLASHkey is needed.
94C35_Book.book Page 18 Thursday, June 2, 2005 3:10 PM
To Next Page
Loading...
