Motorola BRAVO FLX pager - Overflow Condition and Indicators; Settings and Customization for Bravo FLX; Turning the Light On and Off; Changing Alert Modes

4
An overflow condition occurs when all message slots
are filled with unread messages and a new message
is received. Upon receipt of a message, while the
pager is in the overflow condition, the oldest unread
message is discarded. In this mode, the overflow in-
dicator replaces the default idle display
with overflow . Messages must be read and erased
to clear the overflow display.
TURNING THE LIGHT ON AND OFF
❶ Press V to turn the light on.
❷ To turn the light off, press V again. The light turns
off automatically two seconds after returning to
the standby screen.
CHANGING ALERT MODES
❶ Press X . Either silent ? or au d io ? is
displayed, depending on the current mode.
6881025b10-A.fr5 Page 4 Thursday, December 5, 1996 09:38