English
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylised M logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and are used under licence.
All other trademarks are the property of their respective owners.
© 2011 Motorola Solutions, Inc.
All rights reserved.
OPERATION OF MENU SETTINGS
Press Menu button to navigate through the Menu settings. At any time in Menu mode, press PTT button briefly or wait 3 seconds to
exit the menu.
For further information, please contact your Motorola Dealer or refer to your specific User Guide available at:
www.motorolasolutions.com/emea/CLP.
ATTENTION
Before using this product, read the RF energy awareness information and operating instructions contained in the Safety and RF
Energy Exposure Booklet enclosed with your radio package.
HOW TO... STEP 1 STEP 2
Change Channel Press Menu button to navigate to Channel. Press +/- button to change channel.
Enter Monitor mode Press Menu button to navigate to Monitor.
Press +/- button to activate or deactivate
Monitor.
Enter Scan mode Press Menu button to navigate to Scan.
Press +/- button to activate or deactivate
Scan.
Access and set up other
features
Other features, (such as changing channel frequency and sub-codes, activating voice
scramble, LED pattern options and VOX settings), can be accessed using the CPS
(Customer Programming Software) and programming cable, available as an optional
accessory. Ask your Motorola dealer for more information.
Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button press.
68012002086_a.book Page 4 Sunday, December 4, 2011 5:23 PM
To Next Page
Loading...
Need help?
General
