Motorola CLP446e - Transmitting and Receiving

Figure 4: Swivel Belt Clip Holster
1
2
Item Number Description
1 Cord Guide
2 U-Shaped Groove
4 Turn the belt clip to the position as needed.
2.6
Transmitting and Receiving
Procedure:
1 To transmit calls, perform one of the following actions:
• Press and hold the PTT button on the front of the radio.
• Press and hold the PTT button on the wired audio accessory with the inline PTT button.
2 Speak clearly into the microphone on the audio accessory.
3 Release the PTT button to listen.
MN006181A01-AC
Chapter 2 : Getting Started
16