5 Enabled through Customer Programming Software (CPS):
Long Press Menu button for 2s to access:
a Easy Access Call Tone.
b Escalate Call–Switch channel, announce, and send call tone.
2.8
Selecting Channels
Procedure:
1 Press the Menu button.
You hear a voice prompt to change channel by pressing the (+) or (-) button.
2 Select the required channel.
The LED indicates the color of the new channel.
3 Press the PTT button to confirm or the channel is activated after three seconds hang time.
2.8.1
Default Channel Settings for CPS
The table describes the default channel settings for Customer Programming Software (CPS).
Table 3: Channel Settings for CPS
CLP446e
5
Models and CLPe PLUS Models
Channel LED Status Color
1 Red
2 Green
3 Yellow
4 Blue
5
Where permitted by local country law. Restricted to 8 channels in Russia by law.
MN006181A01-AC
Chapter 2 : Getting Started
18
To Next Page
Loading...
