Motorola CM300TM - Option Board On;Off; Set the Backlight Intensity

50
English
USER SETTINGS
OPTION BOARD ON/OFF A
Use this feature to enable or disable an option
board.
•The
A symbol appears on the display
when the option board feature is On.
Press the preprogrammed Option Board
button (see page 14) to toggle the option board
on or off.
– or –
SET THE BACKLIGHT INTENSITY
Use this feature to change the brightness of
the backlight.
4 G or H until
5 D to select
6 G or H until
-or - until
7 D to select the current setting.
1 D to enter menu mode.
2 G or H until
3 D to select
PWR LVL
PWR LVL
HIGH
LOW
UTILITY
UTILITY
4 G or H until
5 D to select
6 G or H until
-or- until
7 D to select the current setting.
1 D to enter menu mode.
2 G or H until
3 D to select
4 G or H until
5 D to select
OPT BRD
OPT BRD
ON
OFF
UTILITY
UTILITY
BKLT INT
BKLT INT
07_Utilities.fm Page 50 Friday, July 11, 2003 11:08 AM