To Next PageTo Next Page
Need help?Do you have a question about the Motorola CM300TM and is the answer not in the manual?
General| Frequency Range | VHF: 136-174 MHz, UHF: 403-470 MHz |
|---|---|
| Waterproof | No |
| Operating Temperature | -30°C to +60°C |
| Channel Spacing | 12.5/25 kHz |
| Audio Output | 4W internal |
Instructions for powering the radio on and off.
How to control the audio volume level of the radio.
Process for choosing a specific radio channel.
Steps for listening to transmissions on the radio.
How to monitor radio channels for activity.
Method for monitoring without audible noise.
Monitoring with squelch disabled.
How to send a radio transmission.
Switching between repeater and direct communication modes.
Accessing pre-stored favorite channels.
Saving current channels for quick recall.
Adjusting radio sensitivity for proximity or range.
Enabling hands-free transmission via voice activation.
Setting private line or digital private line codes for channels.
Remotely disabling radio operation for security.
Procedure for receiving a specific radio alert.
Procedure for sending a specific radio alert.
How to receive a Call Alert notification.
How to send a Call Alert notification to another radio.
Accessing repeaters using DTMF tones.
Features for initiating and responding to emergency signals.
How to transmit an emergency alert signal.
Steps to cancel an active emergency alert.
Responding to transmissions while scanning.
Initiating a system-wide scan for activity.
Terminating an active system scan.
Automatically starting scans based on channel selection.
Disabling automatic scan initiation.
Temporarily removing unwanted channels from scan lists.
Reinstating previously deleted nuisance channels.
Modifying channels within a scan list.
Managing channels within scan lists.
Setting priority for channels in scan lists.
Procedure for answering an incoming phone call.
Steps for initiating a telephone call.
Modifying entries in the radio's phone list.
Changing codes for repeater access.
Enabling or disabling all alert tones.
Controlling tones generated by button presses.
Assigning specific tones to call types.
Adjusting alarm tone volume for unanswered calls.
Adjusting radio's noise filtering.
Configuring transmit power (high/low).
Enabling or disabling an optional hardware board.
Adjusting display backlight brightness.
Viewing the radio's current software version.
Details of the product's limited warranty coverage.
General terms and conditions of the warranty.
Information on state-specific warranty rights.
Instructions for obtaining warranty service.
Exclusions from the product warranty coverage.
List of available antennas for the radio.
Various alarm and accessory components.
Available microphone and audio accessories.
List of connecting cables.
Accessories for setting up a control station.
Data-related accessories and technologies.
Brackets and hardware for mounting the radio.
Accessories for public address system integration.
Information on safe product usage and RF exposure compliance.
Explanation of basic unit-to-unit radio communication.
Overview of the CM300 radio's capabilities.
Explanation of the radio's LED status lights.
Description of the radio's display screen and symbols.
Details about an optional microphone with keypad.
Tone indicating successful radio self-test.
Tone indicating failure during radio self-test.
Tone indicating positive status or action.
Tone indicating negative status or action.
Tone for a valid button press.
Tone for an invalid button press.
Button function for accessing phone mode.
Button function for managing option boards.
Button function for the Escalert feature.
Functionality of the main menu button.
Buttons used for navigating menu options.
Steps for navigating through the radio's menus.
How to exit the radio's menu system.
Removing contacts from the phone list.
Modifying existing contacts in the phone list.
