Motorola COMMERCIAL CM160 - Getting Started; Turning the Radio On-Off; Adjusting the Volume; Radio on Message (CM160)

7
English
BASIC USER GUIDE
GETTING STARTED
Turning the Radio On/Off
Adjusting the Volume
Turn the On/Off/Volume Control knob clockwise to
increase the volume, or counterclockwise to
decrease the volume.
– or – use the pre-programmed Volume Set button:
Radio On Message (CM160)
At power up the radio may display a message
customised by your dealer, e.g.:
After this text has been displayed, the radio
performs a self test routine. During the routine the
Green LED lights. On completion of a successful
self test the radio produces the Self-Test pass Tone,
the Green LED indicator goes out and the display
shows the channel that was in use at power down,
typically:
This may be a number or an alias and will be the
current channel.
ON OFF
Rotate the On/Off/
Volume Control knob
clockwise until you
hear a click.
Rotate the On/Off/
Volume Control knob
counterclockwise until
you hear a click. The
display clears and the
LED indicators turn off .
Volume Control Knob
ON
OFF
1 Hold down the Volume Set button. You will
hear a continuous tone.
2 Turn the On/Off/Volume Control knob to the
desired volume level.
3 Release the Volume Set button.
RADIO ON
CHAN 35
CM140_160_EN.fm Page 7 Monday, November 24, 2003 3:49 PM