Motorola DCH3200 - Connecting Your DCH Receiver to an A;V Receiver - Audio; Connecting an A;V Receiver - Audio

6 CONNECTING YOUR DCH RECEIVER
21
Connecting Your DCH Receiver to an A/V Receiver — Audio
Note: Only (1) audio connection needs to be made to an A/V receiver
.
Connecting an A/V Receiver — Audio
There are several options available for audio connections to your A/V receiver:
• Digital audio (OPTICAL S/PDIF)
• Digital audio (COAXIAL S/PDIF)
• Stereo audio (
AUDIO L AND R)
• HDMI
If your A/V receiver supports it, the optical (
S/PDIF), coaxial (S/PDIF), or HDMI audio
outputs may be used in place of the stereo audio outputs (
AUDIO L and R). In most
cases these outputs offer a higher level of audio quality, including support for Dolby
Digital 5.1 audio.
• Digital audio optical (S/PDIF) — Connect the optical cable to the digital
audio optical connector on the DCH receiver and the optical connector on
the A/V receiver.