Motorola DSR-6404 - User Manual

Document No.: 583611-001
Motorola DSR-6400 Series
Satellite Multiplex Receiver/
Transcoder Operator Guide
AUTHORIZED
BYPASS
SIGNAL
DOWNLOAD
RELAY 1
RELAY 2
RELAY 3
ALARM
DSR-6400
MESSAGE
Paul, Discovery is suggesting that we add some language to the manual about setting up GigE
output for multicast and unicast addresses. In their labs they had a difficult time setting up
GigE out because the device they were connecting to didn't provide an ARP response. Jeff
Paul, we need to add Web GUI info about transcoding in appliance mode and how to
understand the possible output bandwith limitations.

Motorola DSR-6404 Specifications

General

Brand	Motorola
Model	DSR-6404
Category	Receiver
Language	English

Summary

Operation Precautions and Safety

Repairs and Assistance

Guidance on obtaining support for product returns or repairs.

Important Safety Instructions

Critical safety warnings and procedures for damage requiring service.

Introducing the DSR-6400 Series

Key Features

Overview of the primary functionalities and capabilities of the DSR-6400 Series.

Model and Transcoding Capacity

Details on DSR-6400 Series models and their service transcoding capabilities.

PID Mapping

Explanation of PID mapping schemes for output services on ASI and GigE ports.

Processor; Back Panel Associations

How processor numbers relate to cue tone ports and relay ports on the back panel.

Connecting the DSR-6400 Series Unit

Unpacking and Rack Mounting

Procedure for unpacking the unit, initial connections, and rack mounting guidelines.

Remote Operation

Instructions for configuring and operating the unit remotely via a web browser.

Operating the DSR-6400 Series

Front Panel and Menu Navigation

Guide to using the front panel, navigating menus, and understanding the LCD panel.

Input and Network Configuration

Configuring input ports, tuning, IP addresses, and network parameters.

Audio and Output Settings

Customizing audio outputs, gain levels, language, and ASI output settings.

System Management and Diagnostics

Settings for alarms, resets, firmware, downloads, and accessing diagnostic screens.

Product Support

If You Need Help

Contact channels for technical assistance and product support.

Calling for Repairs

Procedure and contact information for sending the unit for repair.

Reference Information

Downlink;L-Band Frequency Conversion Tables

Formulas for converting C-band and Ku-band frequencies to L-band.

Language Abbreviations

List of recommended language identifiers for audio, subtitle, and text.

Diagnostics

Introduction to Diagnostics

Overview of diagnostic screens and how they are used for troubleshooting.

Fast Facts Diagnostic Screens

Guide to accessing and viewing Fast Facts screens for detailed unit information.

DSR-6400 Series Specifications