Motorola DLR1020 - Multi-Unit Charger Operation; Charging a Radio and Battery using a Multi Unit-Charger - MUC (Optional Accessory)

English
21
RADIO OVERVIEW
Drop-in Tray Charger Battery State of Charge Indications
If there is NO LED indication:
1. Check if the radio with battery, or the battery alone, is inserted correctly. (refer to step 4 of "Charging with the
Drop-in Tray Single Unit Charger (SUC)" on page 18)
2. Ensure that the power supply cable is securely plugged into the charger socket using an appropriate AC
outlet and there is power to the outlet.
3. Confirm that the battery being used with the radio is listed in Table 3 on page 19.
Table 5: Battery State of Charge
LED Indication Battery State of Charge
Flash Red 1 Time
Battery Low
Flash Amber 2 Times
Battery Medium
Flash Green 3 Times
Battery High