EasyManua.ls Logo

Motorola DLR1020 - Private Reply; Transmitting and Receiving; Talking to a Group in a Channel

Motorola DLR1020
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
29
GETTING STARTED
TRANSMITTING AND RECEIVING
Press the (+) button to increase the volume, or
the (-) button to decrease the volume.
To receive, listen through the speaker. To
respond, press the PTT (Push to Talk) and
WAIT to hear the Talk Permit Tone (a quick
double beep) BEFORE you start speaking.
Hold the radio vertically 1 to 2 inches (2.5cm to
5cm) from mouth when talking. Release the
PTT to listen.
The Tx/Rx Indicator slow blinks RED when on
standby. When the radio is transmitting, the Tx/
Rx Indicator is solid RED.
When the radio is receiving, the Tx/Rx
Indicator LED blinks RED quickly.
Talking to a Group in a Channel
To transmit, press the PTT (Push to Talk) and
WAIT to hear the Talk Permit Tone (a quick
double beep) BEFORE you start speaking.
PRIVATE REPLY
Note: All the DLR Series radio Programmable Top
Button is defaulted to Private Reply function.
If you need to change this setting, please
use the free online CPS software that is
available in
www.motorolasolutions.com/DLR.
Solid Red
Tx/Rx
Indicator
LED when
transmitting

Table of Contents

Related product manuals