25
RADIO OVERVIEW
Multi-Unit Charger Battery State of Charge Indications
If there is NO LED indication:
1. Check if the radio with battery or the battery alone, is inserted correctly (refer to step 5 of "Charging a Radio
and Battery using a Multi Unit-Charger - MUC (Optional Accessory)" on page 23).
2. Make sure the power cord is securely plugged into the MUC and the appropriate AC outlet. Make sure there
is power to the AC outlet.
3. Confirm that the battery being used with the radio is listed in Table 3 on page 19.
Table 8: Battery State of Charge
LED Indication Battery State of Charge
Flash Red 1 Time
Battery Low
Flash Amber 2 Times
Battery Medium
Flash Green 3 Times
Battery High
To Next Page
Loading...
