General Radio Operations
7.1
Transmitting and Receiving Calls
1 Press the PTT button to respond.
NOTICE:
Wait for the Talk Permit Tone (TPT) to end
and speak. If you receive a busy tone, the
channel is either not available, busy, or there
is no user reachable within transmission
range.
A quick double beep is heard.
2 Hold the radio vertically by 1 to 2 in. from mouth
when speaking into the microphone.
3 Release the PTT button to listen.
Table 7: Tx/Rx LED Indicator
Indicator Status
Slow blink-
ing red
The radio is on standby.
Solid red The radio is in transmission
mode.
Fast blink-
ing red
The radio is in receiving mode.
English
27
To Next Page
Loading...
