Channel
Current channel that the radio is using, depending on
radio model.
PROFILE ID Number
The radio in your fleet (independent of the channels that
users are assigned to) should use the same PROFILE
ID. It is important to customize the PROFILE ID number
in order to avoid interference from other users using the
default 0000 number. In order to customize your radio
fleet PROFILE ID, choose a four digit number and enter
it using the radio Advanced Configuration Mode (Turn
off the radio, press PTT → Volume Up → Power
buttons at the same time, and hold until you hear
Programming Mode voice prompt from your radio. For
more information, refer to the Advanced Configuration
Mode on page 32.
7.7
Top Button Options
The Top button is programmed to Private Reply feature by
default.
You can configure the Top button to other features such as
Page All Available, Call Available, Direct Call and Mute.
For more information on Top button configuration, refer to
Advanced Configuration Mode on page 32.
7.8
Radio Status
Table 9: Radio Status
Radio Status
Front LED Indicator Top Button LED Indi-
cator
Voice Prompt or Tone
Power-Up Solid Red for 2 sec-
onds
OFF “Battery Level <Level>, Channel
<Number>”
English
30
To Next Page
Loading...
