Motorola DSR-6100 - Operating the DSR-6100

DSR-6100 15
3
Operating the DSR-6100
All operations described in this chapter require use of the front panel, as shown in Figure 3-1.
Figure 3-1: DSR-6100 Front Panel
Relay 1 - 3 Illuminates when relays 1, 2, or 3 are activated.
Alarm Illuminates when the unit enters an alarm state.
Authorized Illuminates when the unit is authorized by the service provider.
Bypass Illuminates when the unit is in the bypass state.
Signal Illuminates when the unit is locked to a valid carrier.
Download Illuminates when the unit has successfully received new firmware and
is awaiting activation.
Relay 1
Relay 2
Relay 3
Alarm
LCD Screen Authorized
Bypass
Signal
Download
Arrow Buttons ENTER Button
DSR-6100