Motorola Focus72 - Device Operation and Access Troubleshooting

26
Help
General What is the
signicance of
LED
flashing?
A blinking LED indicates the following
status:
Rapid blinking: 1. Your Camera is in
setup mode. You can add the Camera
to your account in this mode. Out of
the box, the Camera is in setup mode.
To reset to setup mode, press and hold
the PAIR button on one of the wire
leads from the Camera until the LED
indicator flashes rapidly.
Slow blinking: 2. The Camera is either
connecting to the router or lost the link
to the router. Please ensure that the
Camera is in the Wi-Fi
®
signal range.
LED is stable: The Camera is
connected to the Wi-Fi
®
network.
Connectivity
Issues
I am not able to access
my Camera.
Please check if the Camera is within
Wi-Fi
®
range. If the LED on your
Camera is slow blinking, please try to
move the Camera closer to the router
for better Wi-Fi
®
range and try again.
Setting Up During setup on device
for Android™ and iOS,
during the last step I
am
not able to nd my
Camera and the setup
fails.
Please reset the Camera to setup
mode and try again. Press and hold
the PAIR button on one of the wire
leads from the
Camera until you
hear a beep. The
LED indicator
flashes rapidly,
indicating that it is in
setup mode.
Now restart the setup
from your
Smartphone again.
30 H