27
English
RADIO CALLS
STATUS CALLS
A status is a code for transmitting prearranged
messages, e.g. status “05” may indicate
“Return to Base”. The prearranged messages
and associated code digits are contained in a
Status List which contains up to 255 entries.
This list is used for both incoming calls, when
the status of the calling radio is displayed, and
outgoing calls, when your status is sent either
to a requesting radio or to other radios.
Making a Status Call
When the radio is in the IDLE state or during a
call, the status list may be used to select a
status message to reply to a calling radio or
send your status to another radio.
There are two ways to enter the Status List:
Method 1
Press the Status List direct access button, if
programmed by your dealer.
Method 2
Once in the Status List, there are two ways to
choose the desired status:
Method 1
Turn the rotary knob (1) clockwise or counter-
clockwise until you reach the desired status
indicated on the display.
Method 2
1
c to enter Menu Mode.
2
+ or e until:
3
c to select
+ or e until:
f
(e.g On Break)
(e.g. 04)
Status
Message Alias
Number
To Next Page
Loading...
Need help?
Battery
Operating Environment
Weight and Dimensions
