GETTING STARTED
18
English
Attaching the Dust Cover
1. Place the dust cover loop over the attached
antenna.
2. Slide the loop all the way down to the base of
the antenna.
3. Insert the dust cover tab into the slot above
the connector.
Dust Cover
Loop
Dust Cover
Tab
Slot for
Dust Cover Tab
4. Tighten the thumbscrew to hold the cover in
place. DO NOT overtighten the thumbscrew.
Thumbscrew
UG_540_580 _EN.fm Page 18 Wednesday, August 14, 2002 10:13 AM
To Next Page
Loading...
