37
English
SPECIAL CALLS
DeletingMessages from the Data Calls List Status/Voice Call replies to an SDM
Where an SDM contains a calling party
number, the radio can respond with a status
message or voice call.
To respond with a status message, from the
data call list interrogate mode or data message
scrolling mode, press the Status button. The
radio will exit the data mode and enter the
dialling state for example:
Thestatusdigitscanthenbespecifiedasin
normal status mode.
Torespondwithavoicemessage,usethe
d
button, to remove the status symbol S and
press the PTT or # button to initiate the call.
You can move directly from the Data Calls List
to the Missed Calls List by pressing the Missed
Calls button. Once in the Missed Calls List the
functionality is as detailed in RADIO CALLS -
Missed Calls.
1 To delete data messages from the data calls
list or while viewing data messages.
2
CLEAR button
Display shows:
3
c (or *# or CLEAR button)
to delete data message from the calls list.
4
x to retain data message in the calls list.
5 *# deletes the currently selected
datamessagewithnodisplayprompt.
6 Radio returns to the data calls list interrogate
mode after each deletion until the last mes-
sage is deleted when the display returns to
the idle state and the data message icon
K
is extinguished.
Delete?
Display shows:
Display shows:
213S
213
To Next Page
Loading...
