2
• Maximum ambient temperature around the charger must
not exceed 40°C (104°F).
• Connect the charger only to an appropriate power supply
listed in the Online User Guide.
• The AC outlet to which the power cord is connected
should be close and easily accessible.
• Make sure that the power cord is located where it will not
be stepped on, tripped over, or subjected to water,
damage, or stress.
• Connect the power cord only to an appropriately fused
and wired AC outlet with the correct voltage, as specified
on the product.
• Disconnect from line voltage by removing the power cord
from the AC outlet.
ADDITIONAL INFORMATION
The complete Online User Guide is available at
https://learning.motorolasolutions.com through publication
part number:
MN009420A01
MN009419A01.book Page 2 Thursday, August 24, 2023 7:03 PM
To Next Page
Loading...
Need help?
General
