Motorola LI4278 LINEAR IMAGER Pairing Guides

PAGE 4
INSTRUCTION GUIDE
PAIRING THE LI4278 TO A TABLET
LI4278 LINEAR IMAGER
PAIRING THE LI4278 TO iOS
Select Settings from the iPad Desktop:
3
Turn Bluetooth On:
4
Choose LI4278 from available Bluetooth
devices. The serial number of the device
assists in identifying the correct device:
5
Tap the LI4278 to select it. The iPad
automatically connects to the linear imager.
The scanner emits a short low beep followed
by a short high beep indicating the successful
connection.
6

Motorola LI4278 LINEAR IMAGER Specifications

General

Scan Rate	547 scans per second
Decode Capability	1D barcodes
Scan Pattern	Single line
Light Source	LED
IP Rating	IP42
Scanner Type	Linear Imager
Battery	Rechargeable Li-ion battery
Drop Specification	1.8 m (6 ft) drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Technology	Linear Imager
Radio Range	Up to 100 m (330 ft) in open air
Interface	USB, RS232, Keyboard Wedge
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Weight	7.9 oz./224 g
Dimensions	9.8 cm H x 7 cm W x 18.6 cm L (3.8 in H x 2.7 in W x 7.3 in L)