Motorola LI4278 LINEAR IMAGER Pairing Guides

PAGE 3
INSTRUCTION GUIDE
PAIRING THE LI4278 TO A TABLET
LI4278 LINEAR IMAGER
PAIRING THE LI4278 TO iOS
FOLLOW THESE
10 EASY STEPS:
1
Set LI4278 Factory Defaults
The following barcodes must be
scanned before attempting to pair the
scanner to the Apple device.
Note: This feature is only available with LI4278 firmware
PAABIS00-002-R00 or higher.
2
LI4278
iPad

Motorola LI4278 LINEAR IMAGER Specifications

General

Scan Rate	547 scans per second
Decode Capability	1D barcodes
Scan Pattern	Single line
Light Source	LED
IP Rating	IP42
Scanner Type	Linear Imager
Battery	Rechargeable Li-ion battery
Drop Specification	1.8 m (6 ft) drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Technology	Linear Imager
Radio Range	Up to 100 m (330 ft) in open air
Interface	USB, RS232, Keyboard Wedge
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Weight	7.9 oz./224 g
Dimensions	9.8 cm H x 7 cm W x 18.6 cm L (3.8 in H x 2.7 in W x 7.3 in L)