18
18 Field Programming Capabilities
Field Programming Capabilities
The radio uses non-volatile memory to store customer unique information. If a
frequency, squelch code or channel-slaved scan list needs to be changed, it can
be done at a service location with radio service software (RSS). The time-out
timer can be disabled or changed to any duration from 1 to 255 seconds. The
default setting is 30 seconds. Scanning radios can also be programmed to enable
talk-back scan or the priority sample rate can be changed. Finally, radios ordered
with selective signalling and 16-pin expanded accessory connector can be
programmed to include a wide variety of features and accessories. It is not
necessary to open the radio for reprogramming.
To Next Page
Loading...
