5
It is also possible to put a drop of superglue on either
side of the soldered wire to help hold the wire in
place. I prefer a drop rather than smothering the
whole wire with glue, in case the wire needs to be
removed at some point.
If your display looks like this, the
radio is NOT scanning! The unit will
NOT scan without the microphone
being "on hook".
Scan Modes:
The radio has 4 different scan modes indicated by dashes next to the labels on the right of
the display. If your display is changing between the scan display and the channel number,
the radio is "off hook" and not currently scanning.
Scan
The channels in this list are set using the Motorola service
software. There is no other way to change the frequencies
in this list.
To Next Page
Loading...
