Motorola MaxTrac 300 - Setting up the User Scan List; Priority Scan; User Scan; Priority User Scan

6
Priority Scan
Same as scan, but the priority channels are checked more
often than the regular channels.
User Scan
The scan list for this mode is set from the front panel of
the radio. See below.
Priority User Scan
Same as user scan, but it also checks the 2 priority
channels more often than the user selected channels.
Setting up the User Scan list:
1.
Hold the [Scan] button for 2 seconds, or until you
hear the second beep.
2.
The channel number will flash letting you know
it's in User Scan set mode.