Using Your Digital Audio Baby Monitor 11
ENGLISH
3. Using Your Digital Audio Baby Monitor
Please read these instructions carefully, and be aware that this Digital Audio
Baby Monitor is only intended as an aid. It is not a substitute for responsible,
correct parental supervision.
3.1 Power on/off the parent unit
1. When the parent unit is off, press and hold until the Link Indicator is on.
The parent unit is now powered on and will search for and link itself to the
baby unit.
2. When the parent unit is on, press and hold until the Link Indicator turns
off. The parent unit is now powered off.
3.2 Power on/off the baby unit
When the baby unit is off, press and hold until the Power Indicator is on. The
baby unit is now powered on.
When the baby unit is on, press and hold until the Power Indicator turns off.
The baby unit is now powered off.
NOTE
Do not place the parent and baby units too close together, or you may hear a
high pitched noise. This is not a fault. The units are designed to be operated at
some distance apart, e.g. in separate rooms.
3.3 Adjust speaker volume
There are 6 volume levels on the parent unit, including VOLUME OFF.
1. Press or on the parent unit to access the current volume level.
2. Press to increase or to decrease the volume of the parent unit
respectively.
To Next Page
Loading...
