12 Using Your Baby Monitor
3. Using Your Baby Monitor
Please read these instructions carefully, and be aware that this baby monitor is
only intended as an aid. It is not a substitute for responsible, correct parental
supervision.
3.1 Power on/off the parent unit
1. When the parent unit is off, press and hold until the Link Indicator is on.
The parent unit is now powered on and will search for and link itself to the
baby unit.
2. When the parent unit is on, press and hold until the Link Indicator turns
off. The parent unit is now powered off.
3.2 Power on/off the baby unit
When the baby unit is off, press and hold until the Power Indicator is on. The
baby unit is now powered on.
When the baby unit is on, press and hold until the Power Indicator turns off.
The baby unit is now powered off.
NOTE
Do not place the parent and baby units too close together, or you may hear a
high pitched noise. This is not a fault. The units are designed to be operated at
some distance apart e.g. in separate rooms.
3.3 Adjust speaker volume
There are 5 volume levels on the baby unit, and 6 levels on the parent unit,
including VOLUME OFF.
1. Press or on the parent unit or or on baby unit to adjust the
respective volume level.
2. VOLUME OFF will be displayed if the volume of the parent unit is turned
off.
Changing the volume setting on the baby unit affects the volume at the baby
unit when you use the Talk Back feature and when playing a lullaby.
To Next Page
Loading...
Need help?
General
