5.5
Reset the Smart Monitoring Companion
Note: If your Companion Unit is moved from one router (e.g. home) to
another
(e.g. office) or you have setup issues, then the Unit must be reset.
•
Press and hold PAIR button for more than 20s to enter to deregister
mode
and perform factory default. You will hear a series of bleeps as you
hold the
button. After 20 seconds the unit will re-initialise. When it is
ready the night
light will flash ready for pairing.
•
Register your device to Smart Nursery App by following the steps in section
5.3.3 for Android™ devices or in section 5.4.3 for iOS
®
devices.
To Next Page
Loading...
