Motorola MBP50 - Managing Multiple Cameras

16
Parent Unit Menu Options
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until
is highlighted, and
the
del/ add/ view/ scan menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select add, and press
the
O
button to confirm.
4. Camera
/ / / will pop up, press the
+
UP button or
-
DOWN button to select the desired Camera, and press the
O
button
to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its
camera location (with a * against it) cannot be selected for a new
registration.
5. Press and hold the PAIR button on the side of the Baby Unit until
the Parent Unit finds the camera, beeps and PAIR OK appears on
the screen. The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a camera
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until
is highlighted, and
the
del/ add/ view/ scan menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select
view, and press
the
O
button to confirm.
4. Camera
/ / / will pop up, press the
+
UP button or
-
DOWN
button to select the desired Camera, and press the
O
button to view the picture from that camera.
Note: Only camera locations with a * can selected.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press the
O
button repeatedly to select the available Camera
options from
/ / / , scan.