Motorola MBP50 - Delete a Camera; Scan Camera; Temperature

17
ENGLISH
Parent Unit Menu Options
4.6.3 Delete a camera
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until
is highlighted, and
the
del/ add/ view/ scan menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select
del, and press
the
O
button to confirm.
4. Camera
/ / / will pop up, press the
+
UP button or
-
DOWN button to select the desired Camera, and press the
O
button.
5. Press the
+
UP button or
-
DOWN button to select
, then press the
O
button to delete that registration.
NOTE
You are not allowed to delete the camera if there is only one registered
camera in the system.
4.6.4 Scan camera
This function is only available when you have more than 1 Baby Unit
(Camera).
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until
is highlighted, and
the
del/ add/ view/ scan menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select
scan, and press
the
O
button to confirm.
4. The screen will then display images from dierent registered cameras in
a loop of Camera
/ / / , changing about every 12 seconds.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press OK repeatedly to select the available Camera options from
/
/ / , scan.
4.7 Temperature
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until
is highlighted.
3. Press
O
, then
+
UP /
-
DOWN to select °C or °F.