Motorola MBP50 - Getting Started and Operation; Powering and Pairing Devices

10
Getting Started
2. Getting Started
2.1 Baby Unit Power Supply
1. Connect the small plug of the power adapter to the Baby Unit
(camera) and the other end to a suitable mains power socket.
NOTE
Only use the enclosed power adapter (5V DC /1000mA).
2. Slide the POWER ON/OFF switch to the ON position. The power LED
will light up in red.
3. Slide the POWER ON/OFF switch to the OFF position to turn the Baby
Unit o.
2.2 Parent Unit Power Supply
IMPORTMANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium-
ion battery 3.8V 2000mAh), please charge it for 16 hours before initial use. The
battery is not a user-accessible item. Please contact the helpline if you think it
needs replacing.replacing.