Pager Programming Guide Minitor IV
Troubleshooting Guide
Figure 9 Channel Page
Group Field Name Description
Receiver
Frequency
F1 Enter the frequency of operation for the
channel. Channel frequency entry must be
within the band split range.
Coding Option
(R468, R130, R97,
STD, R134, R138,
R362, R177, R60,
R621, R168(None)
Select one of available configuration
options. This field activates combinations
of tone, call, and duty fields located
directly below this field.
ON/OFF Duty This non-editable field enables or disables
on/off duty functionality for this channel.
This value is assigned in the Function
Switches Page.
Call/Tone Make tone field entries. Entries into the
tone fields are subject to previous
selections of SYSTEM. If tone system
selection is other than USER,
Call Tone
Duty Select either ON or OFF. If ON is selected,
then the address is always on. If OFF is
selected, then the address is normally on
unless the function switch is placed into
the OFF DUTY position. In this position,
the address is non functional.
Table 4 Channel Page
10 9/20/2004 6880309M81-A
To Next Page
Loading...
