Minitor IV Pager Programming Guide
Getting Started
Group Field Name Description
Stored Voice
Function
Enable or disable stored voice models with this
option
Fixed Alert Select either ON or OFF. If ON is selected, the
pager operates in the “fixed alert” mode. This
means the tone alert is at maximum volume
regardless of the position of the volume control.
If OFF is selected, then the alert tone and voice
audio level is adjustable using the volume
control.
Priority Scan F1 Select either ON or OFF. If the pager model is
configured for scan option, then this field
provides the ability to turn the PRIORITY
feature ON or OFF. In the ON mode, the pager
performs a priority scan function. In the OFF
mode, the pager performs a normal scan with
the priority feature omitted.
Alert Duration Select either standard (STD) or alert cycle
duration variable (FIXED) in seconds.
STD = Alert cycle controlled by the transmitted
tone duration.
FIXED = a fixed time entered by the user.
Note: A message may be missed if the alert
duration is too long.
Call Reminder When stored voice is present, this enables the
pager to beep periodically indicating an unread
message.
Priority Alert Select either ON or OFF. When ON Vibra-Page
alerts are replaced by tone alert for call1 only.
Privacy Select either ON or OFF. When set to ON,
prevent the reset button from being used to
monitor the channel.
Reset Function
(Automatic,
Delayed N, Revert,
Manual, Timeout,
Revert N)
Determines how a select call pager squelches a
message after receiving a page.
Model
Option
Squelch level
(1 ~ 10)
Select squelch level
Note: Not all features are available on all models
Table 5 Model Option Page
6880309M81-A 9/20/2004 13
To Next Page
Loading...
