Motorola MINITOR IV - Page 19

Minitor IV Pager Programming Guide
Getting Started
Group Field Name Description
Switch
Position
The function switch has four programmable
positions (SW-A, SW-B, SW-C and SW-D)
Function
Switches
Option
(0 ~ 15)
When an option number is selected in the OPTION
field (SW-A through SW-D), the five fields
(CHANNEL, ALERT TYPE, ON/OFF DUTY,
MODEL and PUSH TO LISTEN) below it are filled
with data related to the option selected. The option
selection numbers are as follows:
Option Description
0 Monitor F1 tone alert
1 Monitor F2 tone alert
2 Selective call F1 tone alert
3 Selective call F2 tone alert
4 Vibrate alert F1 monitor mode
5 Vibrate alert F2 monitor mode
6 Vibrate alert F1 selective call mode
7 Vibrate alert F2 selective call mode
8 Address of duty F1 tone alert
selective call mode
9 Address of duty F2 tone alert
selective call mode
10 Address of duty F1 vibrate alert
selective call mode
11 Address of duty F2 vibrate alert
selective call mode
12 Scan with tone alert only
13 PTL - vibrate alert audio off after
alert F1 selective call
14 PTL – Address of duty F1 vibrate
alert audio off after alert F1 selective
call
15 Not defined
Table 6 Function Switch Page
6880309M81-A 9/20/2004 15