13
Back panel
DEVICE
This can be connected to a device whose coaxial cable was
removed and plugged into NETWORK. See this Quick Start for
details.
NETWORK
This will connect to your coax network.
LAN
This should connect to the Router or Device you’re connecting
to MoCA.
MPS
MoCA Protected Setup (see online user manual for details).
RESET
Press the reset button for 3 seconds in the unlikely event that
you need to reset your MoCA Adapter to factory defaults.
POWER
Connect the supplied power adapter between the power jack
and an electrical outlet.
ON/OFF
Press this button to switch the MoCA Adapter’s power On or
Off.
To Next Page
Loading...
Need help?
General