Motorola Moto G - Select Options and Navigate Screens

Motorola Mobility Confidential Restricted:
PAGE 25 Do not share without consent from Motorola
07/16/2014
3. Pull on the Battery Pull Tab to remove the Battery
from the PCB.
4. If the Battery does not come off of the PCB, slide
the Flat Spudger between the Battery and Front
Housing Chassis to loosen the adhesive.
// CAUTION //
Do not use sharp objects to reach under the
Battery. Reaching under the Battery with sharp
objects may puncture the Battery wrapping.
Step 4-1
Step 4-2