EasyManua.ls Logo

Motorola moto g04s - Hotspot: View or change password; USB tethering; Bluetooth tethering

Motorola moto g04s
353 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To remove a device from the list, tap it, then tap Remove.
Block a connected device
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Tap Wi-Fi hotspot.
3. Tap the connected device, then tap BLOCK.
The device is disconnected from the hotspot and will not be able to reconnect.
Disconnect everyone
To disconnect all devices and prevent them from reconnecting:
1. Turn the hotspot off.
2. Change the password.
3. Turn the hotspot back on to continue using it.
If you’re experiencing performance issues, you can limit the number of connections allowed or temporarily
disconnect devices.
Hotspot: View or change password
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Tap Wi-Fi hotspot.
3. Tap Hotspot password to see the current password.
4. To change the password, type over the current password.
Note: Although you can turn off passwords for your hotspot, keeping a password prevents unauthorized
usage of your cellular data.
USB tethering
To connect a device to the internet using your phone's cellular data and a USB cable:
1. Check that cellular data is on. If cellular data is off, your phone doesn't have an internet connection to
share.
2. Connect your phone to your computer with a USB cable.
3. On your phone, go to Settings.
4. Tap Network & internet > Hotspot & tethering.
5. Turn on USB tethering to start the connection.
You'll see in your notifications.
To stop the connection, tap the notification and turn off USB tethering, then disconnect your phone and
computer.
Bluetooth tethering
To connect a device to the internet using your phone's cellular data and a Bluetooth connection:
Settings : Network and internet
169

Table of Contents

Related product manuals