30
- Highlight Features
This procedure turns Bluetooth on and leaves it on until you turn it
off. When your phone’s Bluetooth power is on, your handsfree
accessory can automatically reconnect to the phone when you turn
on the accessory or move it within range of the phone.
Note:
To extend battery life, use the above procedure and set
Bluetooth power to
Off
when not in use.
Searching for Other Devices
To connect your phone to a Bluetooth headset or handsfree device:
If Bluetooth is turned off, your phone asks if you want to
Temporarily Power On?
Bluetooth. Press
YES
(
-
) to proceed.
Alternatively, set
Power
to
On
in the
Setup
menu to turn Bluetooth on
and leave it on.
Your phone scans for and displays a list of device(s) located within
range of the phone.
Note:
If your phone is already connected to a device, you must
disconnect from it to search for other devices.
To connect to a device, highlight the device name and press
SELECT
(
+
).
The device may request permission to bond with your phone. Select
YES
(
-
) and enter the correct PIN code to create a secure
connection with the device. When the connection is made, the
Bluetooth indicator
à
displays in the home screen, and the external
Bluetooth LED indicator flashes.
Find the Feature
M
>
Settings
>
Connection
>
Bluetooth Link
>
Handsfree
>
[Look For Devices]
UG.GSM.V3.book Page 30 Saturday, January 1, 2000 3:04 PM
To Next Page
Loading...
