Product Safety and RF Exposure MTM700 Mobile Terminal / Basic Service Manual v
PRODUCT SAFETY AND RF EXPOSURE
FOR MOBILE TWO-WAY RADIOS INSTALLED IN
VEHICLES OR AS FIXED SITE CONTROL STATIONS
Compliance with RF Energy Exposure Standards
Your Motorola radio is designed and tested to comply with a number of national and international standards
and guidelines regarding human exposure to radio frequency electromagnetic energy, including:
• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part
2 sub-part J
• American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers
(IEEE) C95. 1-1992
• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999
• Australian Communications Authority Radiocommunications (Electromagnetic Radiation -
Human Exposure) Standard 2001
• ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) “additional requirements
for SMR, cellular and PCS product certification.”
BEFORE USING THIS RADIO, READ THIS INFORMATION WHICH CONTAINS
IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF
ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE
WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND
INTERNATIONAL STANDARDS.
!
C a u t i o n
To Next Page
Loading...
Need help?
General
