51
English
RADIO CALLS
(TRUNKED
OPERATION ONLY)
2. Sending the Telephone Number
Sending the telephone number using the keypad
Sending the telephone number using a number
in the telephone list
3 Your radio attempts to access the telephone
system.
4 If you connect successfully, you will hear a dial
tone.
5 The display will show
the last number dialed.
6a The number can now be entered from the
keypad, using any of the numeric (0 – 9)
keys, and the * and # keys. The cursor
flashes to indicate the location of the next
digit to be entered. A pause can be entered in
the telephone number by first pressing the
* key, then the # key(buffereddialonly-The
pause will be shown on the display as a
P).
6b If your radio is programmed for “live dial,”
each digit is sent out as its key is pressed.
—or—
If your radio is programmed for buffered dial,
each digit is temporarily stored as you enter
them. After entering the number, press the
PTT button to send out the number.
5551135
6c
The telephone number will be sent out; you
will hear tones as they are sent. If you hear a
busy signal, go to step 8 for hang-up proce-
dure.
6a
, or / to enter the telephone list. /
takes you forward to the next member of the
list; , takes you backwards to the previ-
ous member of the list.
6b Stop at the member you wish to call.
6c The display alternates
between showing the
member’s name and
telephone number.
Alternates between:
and
6d Press the PTT button.
6e The telephone number
will be sent out; you will
hear tones as they are
sent.
POLICE DEPT
5556445
POLICE DEPT