52
English
RADIO CALLS
(TRUNKED
OPERATION ONLY)
Sending the telephone number using a location
in the telephone list
3. Having the Conversation and Hanging Up
Notes:
• You can press the pre-programmed phone
button for quick access to the telephone call
feature. This will take you directly to step 3.
•ThePLEASE WAIT message is a timed
message. If you cannot access the tele-
phone system (no dial tone heard), press
. key or the Phone button to hang up,
and start again at step 1 of this procedure.
• If you are out of range of the trunked
system or the phone interconnect is out of
service, NO PHONE is displayed and a
continuous low-pitched tone sounds.
6f If you hear a busy signal, go to step 8 for
hang-up procedure.
6a , or /, to enter the telephone list.
6b Enter the location (any preprogrammed
location from 1 through 19) of the number you
wish to call.
6c The radio will go to the selected location.
6d The display alternates
between showing the
member’s name and
telephone number.
Alternates between:
:
and
6e Press the PTT button.
6f The telephone number
will be sent out; you will
hear tones as they are
sent.
6g If you hear a busy signal, go to step 8 for
hang-up procedure.
POLICE DEPT
5556445
POLICE DEPT
7 If call is answered, communicate in the normal
manner. Press the PTT buttontotalk;release
the PTT button to listen.
8 When finished with your conversation, or if the
number you called is busy or does not answer,
press . or the Phone buttontosendthe
hang-up code.
9
The radio will return to
thehomedisplay.
PLANT POLICE
To Next Page
Loading...
