Motorola PEEKABOO - iPhone;iPad Setup: Account and Device Connection; iOS Setup Requirements and Steps

14
Getting started - Connecting Devices
3.3 User Account and Camera Setup on iPhone®/
iPad®
What you need
• Wi-Fi
®
Camera Unit
• Power adapter for the Camera
• iPhone
®
/iPad
®
with iOS version 9.0 and above
3.3.1 Power ON and Connect the Camera
• Connect the power adapter to an electrical outlet and insert
the plug into the micro USB socket on the side of the Camera
Unit.
• During the start-up sequence the camera will pan from left
to right and stop in the parked position. You will hear a
voice prompt “Your camera is now starting”. (This will take
approximately 30 seconds.)
• The Camera’s Red LED Flashes after the Camera has finished
booting.
3.3.2 Download Hubble for Motorola Monitors App
• Go to App Store to search for “Hubble for Motorola
Monitors”.
• Download “Hubble for Motorola Monitors” App and install it
on your iPhone
®
/iPad
®
.
3.3.3 Run Hubble for Motorola Monitors App on
iPhone®/iPad®
• Ensure that your iPhone
®
/iPad
®
is connected to your Wi-Fi
®
Router.
• Run the “Hubble for Motorola Monitors” App, enter your
account information, read through the Terms of Service,
and then select “By signing up you agree to our Terms &
Conditions” before you tap SIGNUP. (Picture i1)