8
Getting started - Connecting Devices
3.
Getting started - Connecting Devices
How does it work?
When a user tries to access the Camera, our Hubble server
authenticates the user’s identity and permits access to the Camera.
3.1 Setup
Connect the Camera to the Power Adapter, then plug into an
electrical outlet. The Camera must be within range of the Wi-Fi®
router with which you want to connect. Make sure the password of
the router is available for entering during the in-app setup process.
Status of LED Indication:
- Pair / Setup state: LED cycles from Blue to Red
- Unconnected state: LED is Red and Flashing
- Connected state: LED is Blue and always on
- Live Streaming: LED is Blue and Flashing
Note: You can only setup via a compatible smartphone or tablet
and not via a PC.
Access your
Camera locally
View your Camera from any
compatible device remotely
Wi-Fi RouterPeekaboo
Camera
Hubble
Service
To Next Page
Loading...
Need help?
General
