Motorola PEEKABOO - Camera Functions and Features; Connecting Camera to Power; Overview of Hubble App Features

19
ENGLISH
Camera Functions
4. Camera Functions
4.1 Connecting the Camera Unit to power
• Connect the power adapter to an electrical outlet and insert the
plug into the micro USB socket on the back of the Camera Unit.
• The Blue LED will illuminate after approximately 30 seconds
if the camera is set up. The Red LED will flash if the camera is
not set up. (Note: To switch off the device, unplug the power
supply.)
• Run the Hubble App on your smart device.
4.2 Overview of the Features on Hubble App
Event History • Tap Event History to access the
video record list that is triggered by
Motion or Sound detection.
• Delete Events
Tap to delete
selected event(s).
Photo/Video • Take a photo or record a video from
your Camera.
• Tap the Video icon
to activate
Video function. Tap and hold the red
button to start recording and
release to stop.
• Tap the Camera icon to switch
to Camera mode. You can capture
photos from Camera view.
Note:
Photos and videos will be stored in the
internal flash memory of your smart de-
vice, and can be accessed via the Gallery
or Media Player (Android Device). To
play videos, please use the Hubble App.