9
ENGLISH
Getting started - Connecting Devices
3.2 User Account and Camera Setup on Android™
Devices
What you need
• Wi-Fi
®
Camera Unit
• Power adapter for the Camera
• Device with Android™ system version 4.4.2 and above
3.2.1 Power ON and Connect the Camera
• Connect the power adapter to an electrical outlet and insert
the plug into the micro USB socket on the side of the Camera
Unit.
• During the start-up sequence the camera will pan from left
to right and stop in the parked position. You will hear a
voice prompt “Your camera is now starting”. (This will take
approximately 30 seconds.)
• The Camera’s Red LED Flashes after the Camera has finished
booting.
3.2.2 Download Hubble for Motorola Monitors App
• Go to Google Play™ Store to search for “Hubble for Motorola
Monitors”.
• Download “Hubble for Motorola Monitors” App from Google
Play™ Store and install it on your Android™ device
3.2.3 Run Hubble for Motorola Monitors App on
Android™ device
• Ensure that your Android™ device is connected to your Wi-
Fi
®
router.
• Run “Hubble for Motorola Monitors” App, enter your account
information, read through the Terms of Service, then select
“By signing up you agree to our Terms & Conditions” before
you tap SIGNUP. (Picture A1)
To Next Page
Loading...
Need help?
General
